Description
Version:
Version suitable for NC similar to DIN 212 with straight shank ⌀ for standard chucking
especially in hydraulic chucks or high precision collet chucks. For highest concentricity and
process reliability. 
With long flutes and left-hand helix.
≤ ⌀ size 1.7 with 3 teeth; ≥ ⌀ size 1.8 even number of teeth and irregular spacing. ≤ ⌀ size 3.7
both ends with centre points; ≥ ⌀ size 3.8 both ends with centre holes.
Reamer manufacturing tolerance to DIN 1420 for H7 hole tolerance.
Note:
For reamers in 1/100 sizes see No. 162902.
For reamers with diameters and fits to specification see No. 162951
Application for type of drilling: for through holes
Bore ⌀ tolerance: H7
Number of cutting edges Z: 8
Bore ⌀ tolerance: H7
Flute length Lc
: 52 mm
Overhang L1: 123 mm
Overall length L: 170 mm
Number of cutting edges Z: 8
Shank ⌀ Ds
: 14 mm
Technical description
Shank tolerance h6
Nominal ⌀ DC 16 mm
Feed f in steel < 750 N/mm2
0.3 mm/rev
Overhang L1 123 mm
Shank ⌀ Ds 14 mm
Overall length L 170 mm
Flute length Lc 52 mm
Number of cutting edges Z 8
recommended drill ⌀ in steel < 750 N/mm2
15.8 mm
Bore ⌀ tolerance H7
Coating uncoated
Tool material HSS E
Standard Manufacturer’s standard
Through-coolant no
Shank DIN 1835 A to h6
Application for type of drilling for through holes
Colour ring green
Type of product Reaming tool with nondetachable cutters
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....