Version:
Power grip with non-allergenic elastomer coating allows transmission of the required torque with no problems even with wet or oily hands.
On reaching the set torque value, the screwdriver can be felt and heard to trigger and is then again immediately ready for use.
The release torque is higher than the tightening torque (overload protection).
Torque adjustment without using tools just pull the cap and turn it.
The torque setting is displayed in a window (digital display at the end of the handle).
Built-in electronics with NFC interface.
Battery can be replaced by the customer (button cell CR 1/3 N; 3V).
Units of measure:
Nm, lbfft.
To take 6 mm interchangeable blades (No.
659920 − 659928).
Application:
For controlled tightening of screws to a pre-set torque.
Standard:
Tested to DIN EN ISO 6789.
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.
-----------

maximum torque
500 cNm

Direction of tightening
Right-hand tightening

Torque measuring accuracy
±6 %

Test certificate
Manufacturer’s test certificate

Calibration
O1

Overall length L
126 mm

Torque range
100 cNm - 500 cNm

Torque range
1 Nm - 5 Nm

Resolution
5 cNm

suitable interchangeable blades
6 mm

Display
digital

Release signalling
akustisk; haptisk

Trigger principle
mechanical slip clutch

Connection format
exchangeable blade

Measurement technology
mechanical

Data can be recorded
no

Setting the trigger value
digital, adjustable

Feedback
triggering

Reversible reading
Nm; lbfft

Measurement process
Torque

Adjustable trigger value
adjustable

Standard
DIN EN ISO 6789

Weight
101 g

Type of product
Torque screwdriver
Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....